• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Window Handle Replacement

It is easy to replace a broken window handle with the proper tools. It is essential to know the type of handle you have as well as the size of its spindle before purchasing a replacement windows and doors.

Older uPVC windows have cockspur handles for windows. They have spurs that protrude to the lock of a wedge cockspur striker plate. These can be either left or right-handed and need to match when replacing.

What kind of lock or handle do I have?

There are a variety of window handles made from upvc and locks, each having their particular advantages and uses. The type of handle you have will determine the ease to open your windows and if the locking mechanism functions according to the plan. Over time and through regular use, window handles made of upvc can become damaged or worn out, rendering them less effective and secure. In certain instances, they might even fall off completely. It is crucial to fix the handles on your window made of upvc as soon as you notice them falling off. This will help prevent potential break-ins and keep your home safe.

Luckily, replacing your upvc window handles is a simple task that can be completed by nearly anyone. With just a few tools and the proper knowledge, this is a simple procedure that shouldn't take more than a couple minutes. To get started, you will need to determine the kind of handle and lock you have on your upvc window and then identify the best replacement.

Inline Espagnolette Handles

They are typically located on the outside of the window. They are flat in design and have a latch that connects to the locking mechanism on the frame of the window glass replacements near me when it is turned. Inline upvc handles come with a spindle that runs through the middle of the handle into the window frame to operate the latch.

Cockspur Handles

They are usually found on older uPVC windows and have an distinctive hook-shaped design. Cockspur handles are attached to the window frame by only one screw and are less secure than other kinds of window handles.

Handles that tilt and turn

The tilt and turn handles differ from other upvc handles in that they can be rotated to open the window and then tilted into the window to ventilate. Generally, they have a 7mm spindle on the side of the handle. They are available in left and right-handed versions.

It is essential to know the spindle's size prior to purchasing a replacement handles made of upvc. Not all are exactly the same size. Drop something in the middle of the hole to measure the length. This is the length of the spindle that will fit your window.

What is a spindle?

uPVC window handles work similarly as doors. By turning the handle, you will be able to activate a latch inside the frame. This opens the window to allow it to be shut and opened. The handles can become damaged, particularly if they're used frequently or exposed to harsh environments. You may need to replace the handles on your uPVC window if they're not functioning correctly.

There are many different kinds of uPVC handles available comprising Espag, Cockspur and Spaded handle options. These handles are designed in a variety of ways to fit into uPVC frames. Each handle type uses an individual spindle to lock the window mechanism. This is why it is essential to know the kind of handle is installed on your uPVC window to get the correct replacement for it.

You can find out what kind of uPVC handle you have by inspecting the base of the handle. A snap-in cover should be over the screw that holds the base of the handle in position. Remove this and then you should be able to see the second holding screw at the opposite end of the base of the handle. After both screws are removed, you should be able pull the handle from the uPVC.

After you have removed the uPVC handle, carefully remove it from the locking mechanism. Make note of the length of the spindle since you'll need to ensure that you purchase one that is the same length as your original handle and locking mechanism.

The spindle wears down and becomes inoperable with the locking mechanism. This can be caused by corrosion, damage caused by continuous use, or even the locking mechanism becoming looser. If this happens, you will have to replace both the window handle and locking mechanism in order to restore the full functionality of your uPVC Windows.

How do I get rid of my old handle?

Window handles can be damaged or broken over time. It is crucial to repair them as quickly as you can to ensure your safety. It is easy to replace a worn or damaged handle. The task can be accomplished in under one minute without the need of special tools.

To remove the old handle, you must first remove the screw that is located at the base of the handle. Once this is removed the handle can be removed from the base section. Another screw will be situated at the base of the handle. It can also be removed. Once these two screws are removed, the handle can be removed from the window's base.

After removing the handle, align the fixing holes of the new handle to the existing holes in the window frame. If there is a cap or sticker on the new handle, remove it if necessary and then screw the handle in place. Once the handle is in place, it is crucial to verify that it is working by turning the handle, and ensuring that the lock mechanism activates.

Espag handles have an extra spindle that is protruding from the handle and slot into a multipoint locking mechanism within the frame of the window. Cadenza windows feature a blade with cutouts which fit into the lock mechanism. Cockspur handles are long and are hung over the outer frame of the window or the transom bar crossmember.

Once you have installed the new handle, insert the spindle inside the window lock and tighten it. Replace the snap-in cover and screw cap (if applicable) after the handle is fixed. When the handle is ready for use, you can open and close the window a couple of times to ensure it works properly and securely.

How do I fit the new handle?

It's not difficult to alter the handle on your Upvc windows. The process is very easy. All you need is a screwdriver and a little bit of patience. First, ensure that the handle that you are replacing is unlocked. Then remove any visible screws. You can also replace them using screw caps. After removing the handle and you are ready to take a note of the length of the spindle that protrudes from the back of the handle. This is important because it will determine the kind of handle to buy.

Espagnolette handles are the most popular kind of handle that is used on uPVC windows. They have a spindle that is connected to the handle, and is responsible for an internal locking mechanism within the window frame. When the handle is turned, it releases the latch on the window, allowing it to open. Over time and through regular use, espagnolette handles may be damaged or damaged and it is necessary to find an alternative.

Cadenza handles are a different kind of uPVC window handle commonly used on tilt and turn windows. They feature a protruding blade that is operated by a multi-point locking mechanism inside the window. They are usually more secure than espagnolette handles since they are only accessible from the inside. You can replace them with the same procedure as you would do for handles made of espagnolette however, ensure that the new handle is angled, not flat.

Once you've decided on the right handle to purchase, you can simply place the new handle with the screw holes and then screw it in the appropriate position. Then, you should put the screws on and test your new handle. This is done by moving the handle from the locked position to the unlocked and vice versa a few times. If you encounter any issues, it may be beneficial to speak with a professional to see if they are able to assist you in solving the issue. They can advise you on how to resolve the problem in a timely and effective way.